From leka@mamane Tue Feb 16 21:11:43 1993
Return-Path: <leka@mamane>
Received: from mamane.ifa.hawaii.edu by ilima.IfA.Hawaii.EDU (4.1/SMI-4.1)
	id AA02879; Tue, 16 Feb 93 21:11:37 HST
Received: by mamane.ifa.hawaii.edu (4.1/SMI-4.1)
	id AA00621; Tue, 16 Feb 93 21:11:37 HST
Date: Tue, 16 Feb 93 21:11:37 HST
From: leka@mamane (K.D.Leka)
Message-Id: <9302170711.AA00621@mamane.ifa.hawaii.edu>
To: labonte@mamane
Subject: coronal guiding stuff
Status: R


Sorry so late!  HOpe not too late. 

For guiding when the slit & limb were vertical, I had the
x-gain set at 1.9, y at 0.0.  10" grating at 61deg08', 
slit angle at +1.2deg.  (5303A)
Used slit going from disk out, parallel to limb, so that
built-up profile could be fit w/ profile from flat, continuum
images etc.

Hope this is what you were needing.

		-KD